Hughes 9502 Two-Piece BGAN M2M Terminal
The Hughes 9502 Two-Piece BGAN M2M Terminal is a fixed satellite terminal designed for machine-to-machine (M2M) and industrial IoT applications that require reliable IP connectivity in remote locations. Operating on the Inmarsat BGAN network, it enables continuous communications for SCADA systems, remote monitoring, telemetry, automation, and backup communications where terrestrial networks are unavailable or unreliable.
Its two-piece design separates the indoor modem from the outdoor antenna, allowing the antenna to be mounted for optimal satellite visibility while keeping the modem, SIM card, and network equipment protected indoors. With ultra-low power consumption of less than 1 W while idle, the Hughes 9502 is well suited for solar-powered and off-grid installations where energy efficiency is essential.
Satellite Phone Store provides expert guidance on BGAN hardware, airtime plans, and deployment for industrial satellite communications, helping organizations build reliable connectivity solutions for remote assets and critical infrastructure.
Description
Reliable Connectivity for Remote Assets
The Hughes 9502 delivers always-on IP connectivity across the Inmarsat BGAN satellite network, providing dependable communications in locations where cellular and wired infrastructure are unavailable. It is designed specifically for unattended installations that require continuous monitoring and control.
Typical applications include:
- SCADA systems
- Pipeline monitoring
- Utility and Smart Grid infrastructure
- Environmental monitoring
- Oil and gas well automation
- Remote video surveillance
- Out-of-band network management
Its integrated IP Watchdog and automatic PDP context recovery help restore communications automatically following network or power interruptions, reducing the need for manual intervention.
Designed for Low-Power Operation
One of the Hughes 9502's key advantages is its exceptionally low power consumption. With idle power usage below 1 watt, it can operate efficiently from solar panels and battery systems, making it well suited for off-grid deployments with limited power budgets.
Power consumption includes:
- Idle: <1 W
- Receive: approximately 3 W
- Transmit: <20 W
This efficiency allows remote installations to remain connected for extended periods while minimizing energy requirements.
Flexible Installation for Industrial Sites
The two-piece architecture allows the outdoor antenna to be positioned for the best satellite view while the indoor modem remains protected inside an equipment cabinet or control building. The included 10 m RF cable provides installation flexibility for complex industrial environments.
The modem supports multiple networking modes including NAT, Relay Mode, NAPT, and PPPoE, allowing straightforward integration into existing industrial control networks.
Remote Management and Security
The Hughes 9502 supports remote administration using SMS-based management, allowing operators to configure, diagnose, and troubleshoot terminals without visiting the installation. Firmware updates can also be delivered over the air at no additional charge, reducing maintenance costs for widely distributed deployments.
Additional security features help protect communications while built-in GPS supports asset positioning and location-aware applications.
Built for Continuous Industrial Operation
Designed for harsh outdoor environments, the external antenna is rated IP65 and operates in temperatures from -40°C to +75°C. The terminal is intended for continuous unattended operation and is also available in ATEX and Class I Division 2 compliant versions for hazardous locations.
Features
- No connection charge with BGAN M2M(normal BGAN charge is 100 Kbytes)
- Minimum CDRs only 1 Kbyte (normal BGAN charge is 10 Kbytes)
- No charge over-the-air modem software upgrades
- Exclusive airtime packages unique to the Hughes 9502
- Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage
- Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
- Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface
- Ultra-low power consumption
- Transmit : < 20 W
- Narrow beam w/o transmit : 3 W
- Idle (regional beam) : < 1 W
- Off (wake on packet) : < 10 mW (@ 12 Vdc)
- Off (wake on packet) : < 30 mW (@ 24 Vdc)
- Off (GPIO control) : 0 W
- Relay mode passes WAN IP address to the connected RTU
- Security enhancements with extended layers of embedded security options
- Outdoor unit (ODU) can be pole mounted
- Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
- Package Contents : Hughes 9502 BGAN M2M Terminal IDU , 10 meters RF antenna cable , External antenna (ODU)
- Accessories : Modem (IDU) strap , Antenna basic fixed mount kit , Antenna azimuth elevation bracket , Extended warranty options
Package
Hughes 9502 Two-Piece BGAN M2M Terminal Includes:
- Hughes 9502 Indoor Unit (IDU)
- Hughes 9502 Outdoor Antenna (ODU)
- 10 m RF antenna cable
- Power cable
- Quick start guide
- User documentation
Technical Specifications
Power
- Input: 12–24 VDC nominal
- Idle power: <1 W
- Receive: ~3 W
- Transmit: <20 W
Dimensions
- Indoor Unit (IDU): 15.0 × 20.0 × 4.5 cm / 5.9 × 7.9 × 1.8 in
- Outdoor Unit (ODU): 38.5 × 38.5 × 3.3 cm / 15.2 × 15.2 × 1.3 in
Weight
- Indoor Unit (IDU): 1.2 kg / 2.64 lbs
- Outdoor Unit (ODU): 1.9 kg / 4.18 lbs
Durability
- Indoor Unit (IDU): IP40 rated
- Outdoor Unit (ODU): IP65 rated
- Operating temperature: -40°C to +75°C
- Storage temperature: -55°C to +75°C
- Humidity: 95% RH @ 40°C
- Wind survival: Up to 100 mph (with optional mount)
Additional
- Integrated IP Watchdog
- Auto-on/auto-context activation
- SMS remote management
- Over-the-air firmware updates
- NAT, Relay, NAPT, PPPoE support
- ATEX/C1D2 version available
Data Network
- Inmarsat BGAN
- Machine-to-machine (M2M) terminal
- Always-on IP connectivity
- Built-in GPS receiver
Interfaces
- Ethernet connection (RJ45)
- USB–Type B for connection to configuration PC
- RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
- TNC connection on the IDU to the external antenna
