Peplink 802.3af/at PoE Injector - ACW-107
Description
Power and Data Through One Cable
The ACW-107 connects between an unpowered Ethernet port and a compatible PoE device. It adds electrical power to the Ethernet connection, allowing one network cable to carry both data and power to the installed equipment.
IEEE 802.3af/at Support
The injector supports IEEE 802.3af PoE and 802.3at PoE+, with output of up to 30 watts. This makes it suitable for compatible access points and networking equipment that require standard negotiated PoE rather than a manufacturer-specific passive power connection.
Flexible Equipment Placement
Using PoE can simplify installation in locations where separate AC wiring would be inconvenient. The ACW-107 is practical for ceiling-mounted access points, equipment rooms, remote offices, kiosks, and protected outdoor network installations where the connected device is placed away from an electrical outlet.
AC-Powered Installation
The injector accepts 100–240V AC input, allowing it to operate with common electrical systems. Regional versions are supplied for different outlet types, including the ACW-107-US and ACW-107-UK.
Compatibility Considerations
The connected equipment must support IEEE 802.3af or 802.3at power input and remain within the injector’s 30-watt output capacity. Devices requiring higher-power 802.3bt or proprietary passive PoE may need a different power source.
Technical Specifications
Power
- AC input: 100–240V AC
- PoE output: 48V DC
- Maximum output power: 30W
- PoE standards: IEEE 802.3af and IEEE 802.3at
Dimensions
- 145 × 61 × 41 mm / 5.7 × 2.4 × 1.6 in.
Weight
- 349 g / 0.77 lb.
Durability
- Operating temperature: -10°C to 45°C / 14°F to 113°F
- Operating humidity: 15% to 95%
Included
- Peplink ACW-107 802.3af/at PoE Injector
- Regional AC power cord
Additional
- Product type: Active PoE injector
- Model: ACW-107
Interfaces
- Data input: RJ45 Ethernet
- PoE output: RJ45 Ethernet
- Network connection: Wired Ethernet
