Description
4×4 MIMO Cellular Connectivity
The Mobility 40G contains four independent cellular antenna elements. When connected to a compatible 4×4 MIMO cellular router, these elements support multiple signal paths that can improve connection stability and available cellular performance in mobile installations.
Its wide frequency range supports:
- 617–960 MHz
- 1710–2700 MHz
- 3400–4200 MHz
- 4900–6000 MHz
Measured peak gain ranges from 0.3 dBi in the lower-frequency range to 7.0 dBi at 4900–6000 MHz.
Integrated GPS Antenna
A fifth antenna element provides GPS reception across 1561–1602 MHz. It includes a 28 dB low-noise amplifier to support location reporting, vehicle tracking, and other GPS functions available through the connected router.
Designed for Mobile Installations
The antenna does not require a ground plane and supports panel, wall, and pole mounting. Its compact dome measures 13.0 cm in diameter and 3.6 cm high, excluding the mounting spigot, helping keep the installed profile low on vehicle roofs and equipment enclosures.
Common applications include:
- Public safety and emergency vehicles
- Fleet and transportation connectivity
- Mobile healthcare systems
- Field service and utility vehicles
- Mobile broadcasting and remote operations
Weather-Resistant Construction
The IP68-rated enclosure is made from UV-stable PC and ABS material. It is rated for operation from -40°C to 80°C and tested for long-term UV exposure, salt spray, and wind speeds up to 220 km/h.
The antenna is available in black or white to suit different vehicles and installation surfaces.
Five SMA Connections
The SMA version includes five attached cables with male SMA connectors:
- Four cellular cables
- One GPS cable
Each cable is 2 meters, or 6.5 feet, long. The cables are labeled to help identify the cellular and GPS connections during installation.
Technical Specifications
Power
- Maximum feed power: 10 W
Dimensions
- Diameter: 13.0 cm / 5.12 in.
- Height: 3.6 cm / 1.42 in., excluding mounting spigot
- Cable length: 2 m / 6.5 ft each
- Mounting hole diameter: 4.3 cm / 1.69 in.
- Maximum panel thickness: 1.5 cm / 0.59 in.
Durability
- Environmental rating: IP68
- Radome material: UV-stable PC and ABS
- Operating temperature: -40°C to 80°C / -40°F to 176°F
- Storage temperature: -40°C to 80°C / -40°F to 176°F
- UV resistance: UL 746C, F1
- Salt-spray testing: MIL-STD-810F / ASTM 8117
- Wind survival: 220 km/h / 137 mph
- Compliance: RoHS, REACH and WEEE
Included
- Peplink Mobility 40G antenna
- Four attached cellular cables with SMA male connectors
- One attached GPS cable with SMA male connector
- Mounting bracket
- Double-sided 3M adhesive mounting pad
Additional
- GPS frequency range: 1561–1602 MHz
- GPS peak gain: 0.5 dBi at 1575 MHz; 1.6 dBi at 1602 MHz
- LNA gain: 28 ±3 dB
- LNA operating voltage: 3.3 V
- Noise figure: 1.5 dB maximum at 3.3 V
- Manufacturer: Peplink
- Model: Mobility 40G
- Model: ANT-MB-40G-S-W-6
- Antenna type: Omnidirectional mobile dome
- Mounting options: Panel, wall or pole
- Colors: white
Data Network
- Antenna configuration: 4 cellular elements and 1 GPS element
- Cellular operation: 4×4 MIMO
- Cellular frequency range: 617–6000 MHz
- Supported LTE bands: B1–B86, excluding B31, B72, B73, B87 and B88
- Supported 5G bands: n1–n99
- LTE Band 71 support: Yes
- Input impedance: 50 ohms
- Polarization: Linear
- Cellular peak gain:
- 0.3 dBi at 617–960 MHz
- 5.1 dBi at 1710–2700 MHz
- 5.8 dBi at 3400–4200 MHz
- 7.0 dBi at 4900–6000 MHz
Interfaces
- Cellular connectors: 4 × SMA male
- GPS connector: 1 × SMA male
- Total connectors: 5
- Cellular cable type: CFD-200
- GPS cable type: RG-174
