ACR URP-102 Point Pad™ Kit, for RCL-50 / -100/ Series
Description
Control from a Second Location
The URP-102 kit is intended for vessels that need searchlight control from more than one position. A secondary controller can be useful on boats with an upper helm, flybridge, pilothouse, tower, or separate exterior steering station.
Compatible RCL-50 and RCL-100 LED systems can support up to three URP-102 Point Pads when connected to the appropriate master controller.
Full Searchlight Operation
The Point Pad provides fingertip control of the connected searchlight. Its controls allow the operator to:
- Switch the searchlight on and off
- Rotate the light left or right
- Raise or lower the beam
- Select high or low rotation speed
- Activate the XRCiZ maintenance cycle when supported by the master controller
The XRCiZ function periodically moves the searchlight mechanism to help keep its motors, bearings, and electrical contacts operational during periods of limited use.
Surface or Flush Installation
The URP-102 can be surface mounted with its external housing or flush mounted into the helm or console. Separate mounting cases, gaskets, and hardware are provided for both arrangements.
The flush-mount face measures approximately 100 × 94.5 mm, while the installation requires a central wiring-clearance opening and mounting holes according to the ACR template.
Complete Secondary-Station Kit
Unlike the standalone URP-102 Point Pad, the secondary-station kit includes a two-way splitter, four F-type connectors, and 15 ft. of coaxial cable. These components allow the new controller to share the wired communication connection with the vessel’s existing Point Pad.
Confirm Controller Compatibility
URP-102 compatibility depends on the master controller installed with the searchlight. It is used with the URC-102 and URC-103 control systems found on compatible RCL-50, RCL-100, and RCL-100 LED installations.
The URP-102 is not compatible with every earlier ACR master-controller generation. The existing controller model should therefore be identified before replacing a Point Pad or adding another station.
Technical Specifications
Dimensions
- Flush-mount face width: 100 mm / 3.94 in.
- Flush-mount face height: 94.5 mm / 3.72 in.
- Flush-mount cutout width: 73 mm / 2.88 in.
- Flush-mount cutout height: 46 mm / 1.81 in.
- Minimum wiring-clearance hole diameter: 25.4 mm / 1.0 in.
- Mounting-hole diameter: 5.16 mm / 0.20 in.
- Included coaxial cable length: 4.57 m / 15 ft.
Included
- ACR URP-102 Point Pad
- Surface-mount case
- Flush-mount case
- Surface-mount gasket
- Flush-mount gasket
- Two-way coaxial splitter
- Four F-type connectors
- 4.57 m / 15 ft. coaxial cable
- Mounting hardware
- Installation instructions
Additional
- Product type: Secondary searchlight control-station kit
- Manufacturer: ACR Electronics
- Point Pad model: URP-102
- Complete kit part number: 9282.3
- Compatible searchlight families: Selected ACR RCL-50, RCL-100, RCL-100D, and RCL-100 LED systems
- Maximum Point Pads on supported RCL-50 and RCL-100 LED systems: Three
- Installation locations: Helm, flybridge, pilothouse, tower, or secondary steering station
Interfaces
- Control type: Wired membrane keypad
- Communication connection: Coaxial cable with F-type connectors
- Mounting options: Surface mount or flush mount
- Supported controls: Power, left and right rotation, beam elevation, rotation speed, and XRCiZ activation
- Compatible master controllers: Applicable URC-102 and URC-103 systems
