Goal Zero Yeti X 120W AC Power Supply

Faster Charging for Smaller Yeti X Models

The 120W power supply can charge a Yeti 200X or Yeti 500X in approximately half the time of the standard power supplies originally included with those models. For example, Goal Zero lists a roughly four-hour recharge for the Yeti 200X with its included 60W adapter and about half that time when using the 120W supply.

Actual charging time depends on the power station’s battery level, temperature, connected loads, and battery condition.

Replacement Power Supply

The charger can also replace the original AC power supply for the following Goal Zero models:

• Yeti 1000X
• Yeti 1000 Core
• Yeti 1500X

For these larger power stations, the ACW supply provides standard 120W charging rather than the faster rates available from Goal Zero’s higher-output chargers.

Universal AC Input

The adapter accepts 100–240V AC at 50 or 60 Hz. This allows it to operate on different electrical systems when paired with the appropriate physical plug adapter for the local wall outlet.

The included US configuration is intended for standard North American outlets.

8 mm Yeti Charging Connection

The power supply connects to a compatible Yeti through an 8 mm charging port and delivers 16V DC at up to 7.5A. It should only be used with Goal Zero power stations specifically listed as compatible with this charger.

Compatibility Limitations

This power supply is designed for selected Yeti X and Yeti Core models. Goal Zero states that it is not compatible with earlier Yeti Lead Acid or Yeti Lithium power stations. It is also not intended for newer Goal Zero power stations that use different charging connections or input requirements.